Extra large range of expanding collets ranging from 8mm through to 58mm. Collets attach to the 3lb.(1.4kg.) slide hammer or to the adjustable bridge type push pulling attachment.

Made from high quality drop forged heat treated SCM440 steel. Collets are placed in the bore of the bearing or bush, then expanded with the actuator pin so that the lips of the collet secure on the bearing or bush's radius surface. Use the bridge attachment or slide hammer for extracting bearing or bush.

Set Contains (Available Separately):

Item No. Range Description Length
9636-A 8mm to 11mm Collet with Actuator 50mm
9636-B 12mm to 17mm Collet with Actuator 50mm
9636-C 18mm to 23mm Collet with Actuator 50mm
9636-D 24mm to 29mm Collet with Actuator 50mm
9636-E 30mm to 34mm Collet with Actuator 50mm
9636-F 34mm to 38mm Collet with Actuator 50mm
9636-G 39mm to 43mm Collet with Actuator 50mm
9636-H 44mm to 48mm Collet with Actuator 50mm
9636-I 49mm to 53mm Collet with Actuator 50mm
9636-J 54mm to 58mm Collet with Actuator 50mm
9636-K M10 x 1.5P Adaptor Threaded Adaptor 50mm
9636-L M8 x 1.25P Adaptor Threaded Adaptor 50mm
9636-M M6 x 1.0P Adaptor Threaded Adaptor 50mm
9636-1 3lb (1.4kg) Slide Hammer
9636-2 Bridge Pulling Attachment 3 Threaded Adaptors M10 x 1.5, M8 x1.25, M6 x 1.0
Barcode # 9322159996364