The pneumatic dent puller has 3 lbs (1.36kg) slide hammer and is fitted with a brass shut off valve. It is supplied with three different size screw on suction pads.

Simply select the correct size pad to remove the dent, apply shop air and use the slide hammer. Compressed air is exhausted through the handle and unit is fitted with 13" (330mm) inlet hose with 1/4" NPT air plug.

  • Slide Hammer Length: 600mm
  • Working Pressure: 70 - 170PSI
  • Pad Sizes:
    • 1: 60mm Screw On Suction Pad.
    • 2: 120mm Screw On Suction Pad.
    • 3: 150mm Screw On Suction Pad.
Barcode # 9322159918823