T&E Tools Special Metric Tool Set Available for Apprentices. Sets can be ordered with any alternative tool chest.

Set Contains:

• 1/4" Drive: 6 Point
• Metric Skts: 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm
• Metric Deep Skts: 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm
• Spinner Handle 6"(150mm), Extensions 3"(75mm), 6"(150mm)
• Quick Release Ratchet, Universal Joint
• 3/8" Drive: 6 Point
• Metric Sockets: 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm
• Metric Deep Skts: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 18mm, 19mm
• Extensions 3"(75mm), 6"(150mm), Universal Joint, Quick Release Ratchet,
• Adjustable Handle, Spark Plug Socket 5/8"(16mm)
• 1/2" Drive: 12 Point
• Metric Sockets: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 24mm, 27mm, 30mm, 32mm
• Extensions: 5"(125mm), Universal Joint, Adjustable Handle 15"(380mm), Quick Release Ratchet
• Metric Wrenches:
• Combination Wrenches: 8mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 19mm, 21mm
• Hex Key Wrenches: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm
• Torx Keys T10, T15, T20, T25, T27, T30, T40
• Adjustable Wrench 10"(250mm)
• Miscellaneous Tools
• Multi-grip Pliers 10"(250mm), Combination Pliers 8"(200mm), Locking Grip Pliers 10"(250mm)
• Long Nose Pliers 8"(200mm), Offset Side Cutting Pliers 8"(200mm), 680g Telescopic Pick-Up Magnet
• 4Pc. Internal & External Circlip Plier Set, 26 Taper Blade Feeler Gauge Set .0015" to .025"
• Strap Type Oil Filter Wrench 0 to 6"(0 to 150mm), 0 to 24 Volt Circuit Tester
• Ball Pein Hammer 16oz (450g), Soft Face Hammer 16oz (450g), 15"(380mm) Angle Head Pry Bar
• Pin Punches: 3/32", 1/8", 5/32", 3/16", 1/4", Taper Drifts: 3/32", 1/8", 5/32", 3/16", 1/4"
• Centre Punches: 1/8", 3/16", Cold Chisels: 3/8", 1/2", 5/8", Chisel & Punch Angle Gauge
• Heavy-Duty Hacksaw, Magnetic Bit Driver 8.5/8"(225mm)
• Slotted Screwdrivers: 6 x 38mm, 4 x 75mm, 5 x 100mm, 6 x 100mm, 8 x 200mm
• Phillips Screwdrivers: #2 x 38mm, #0 x 75mm, #1 x 75mm, #2 x 100mm
• Metric In-Hex Insert Bits: 2mm, 3mm, 4mm, 5mm, 5.5mm, 6mm
• Slotted 1/4"Hex Screwdriver Bits: 5mm, 6mm
• Phillips 1/4"Hex Screwdriver Bits: #1, #2
• Pozidriv 1/4"Hex Screwdriver Bits: #1, #2, #3
• Torx 1/4"Hex Screwdriver Bits: T10, T15, T20, T25, T27, T30, T40
• 5 Drawer Roller Bearing Tool Chest